KINTO 20214 Trail Tumbler, 16.9 fl oz (580 ml), Black, Double Wall Vacuum Construction, Thermal and Cold Retention

Price: $53.46
(as of Feb 03, 2026 02:11:17 UTC – Details)


Product Name: Stainless steel portable thermos / Actual capacity: 0.58 L / Material: 18-8 stainless steel (powder coating), polypropylene, silicone rubber/BPA free/Made in China; Heat preservation: over 176°F (80°C) (6 hours) / Cold retention: 14°F (6°C) or less (6 hours). *Heat retention effect is in a room temperature of 5°F (20°C±20°C±20°C±2°C). 6 hours after lid It indicates the temperature of the measured water. Cold retention effect is a product with cold water at a room temperature of 6.9 °F (20 °C) ± 2 °C), when the water temperature reaches 4 ° F ± 1 ° C to indicate the temperature of water measured after 6 hours. Before filling your beverages, please add a small amount of boiling water (cold water) and preheat for about 1-2 minutes (precooling) to improve the thermal effect of cooling. This product is a beverage bottle. Do not use for anything outside of its intended purpose. Cannot be used in the microwave, dishwasher, or dryer. Please do not place it near the fire. Do not wash it in boiling water. Do not shake it around as it may cause damage or leakage. Do not drop it or apply strong shock. Please do not shake it to cause unexpected injury or accidents. Do not give this product. Please do not put dry ice in the lid as it may cause expansion and damage or injury. Please be careful not to put too much beverages in the wrong direction. Please use the silicone seal when closing the lid. Please make sure the lid is closed horizontally. Make sure there is no leakage. In order to prevent leakage, please keep it vertically if you put it in a bag, etc. Please do not carry it with precision equipment such as mobile phones, computers, cameras, etc., as there is a risk of damage or breakage. Please do not open the lid immediately after impact or vibration has been applied. The drink may become spilled or burned. Please do not open the lid while the lid is tipped up. Hold and turn slowly to gas Please unplug before unplugging it. Do not open it near precision equipment such as mobile phones due to its double layer structure, even if the part touches your hand is not hot, the drink or mouth part may be hot, so please be careful when burning. Locations, etc. in places where it gets high temperatures. Please do not leave it for a long time. If the contents are high or the amount is low, the carbonation may be easily removed depending on the usage situation. Please check whether there is no rust or scratches on the inside before use. Clean immediately after use. As this may cause rust or beverage spoilage. Please do not leave the contents in the container for a long time. If the contents are hot drinks inside, the inside will be vacuum and the lid will not open. , Beverages sprayed. Please be aware that it may cause burns or other contaminants. If the lid does not open, soak the lid part in about 132°F (50°C) warm water for about 1 minute. To prevent rust from stainless steel, please remove dirt and moisture quickly, dry thoroughly and store away from other metals. Please do not leave it in the water to avoid rust or damage. Please note that this may cause rusting. Please do not use chlorine bleach. If you are concerned about the metal smell such as the first use, put 2 tablespoons of vinegar and warm water to the rim, rinse after 30 minutes. If the spots like rust stick inside the container, add warm water and about 10% citric acid and wash with a soft sponge and rinse thoroughly.
Keeps hot and cold Double wall vacuum construction provides high heat and cold retention. You can also put some soda drinks. Heat Retention: Above 176°F (80°C), Cold Retention: Less than 14.4°F (6°C) (6
Tough Material The bottle body is made of 18-8 stainless steel that is rust resistant and durable. The surface is powder coated for scratch resistance
Lid with handle Easy to carry handle lid opens and closes easily and covers the spout for worry-free outdoor use
Stress-free drinking experience The spout has no protrusions such as screws and a good mouth that can hold smaller ice cubes and is designed to easily fill water from a water server. Diameter: 1.7 inches (42 mm), Minimum Inner Diameter: 1.3 inches (33
Designed to be used as a carafe. This size and form is easy to use as a carafe to share drinks with a few people